NOTICE: help.openstreetmap.org is no longer in use from 1st March 2024. Please use the OpenStreetMap Community Forum

There seems to have been a certain number of edit wars over the classification of various major bridges in New York City.

One of the main criteria for what is a highway=motorway is that it has no intersection controls on the main roadway (such as traffic-signals, rotaries and roundabouts, and stop signs or stop markings). Bridges usually don't have intersections, so that is not useful here. The other two, limited access and roadway separation apply to most of the bridges.

Another important factor is that highway= tags should apply where reasonable to the whole road, not just a segment of it. Many of these bridges were built to carry a major street, but when highways (highway=motorways) were built later ramps were added only where convenient, resulting in incomplete interchanges with them. Whether the bridges are considered an extension of the highway or the major street might factor in.

I'm hoping we can come up with a reasonable set of criteria for what highway= tag bridges like these should have. Don't worry about what commercial maps have these classified as, they also have a mess.

In the below table I've catalogued some area bridges with varying characteristics. The Carries column gives the street the bridge was built to carry, and its classification. The highway=motorway_link column counts the number of directions on the bridge that can be entered/exited (each counting 1) from a highway=motorway. This ignores that not all lanes/roadways go to all exits or all directions on the connecting motorway etc. Vehicles only is whether bicycles and limited-use motorcycles are banned from the main roadway as indicated by signage.

Bridge Carries motorway_link Separate roadways Pedestrian separation Vehicles only Present tagging
Brooklyn Bridge highway=primary Adams St 3/4 Separate Separate Yes highway=trunk
Manhattan Bridge highway=primary Flatbush Ave Ext 1/4 Separate Separate Yes highway=trunk
Williamsburg Bridge highway=primary Delancey St 2/4 Separate Separate Yes highway=motorway
Queensboro Bridge highway=primary NY 25/NY 25A 0/4 Separate Separate Yes highway=motorway
Triboro Bridge (Manhattan span) highway=motorway NY 900G (unsigned) 4/4 Separate Barrier Yes highway=motorway
Willis Ave Bridge highway=primary Willis Ave 2/2 One-way Barrier No highway=primary
145th St Bridge highway=secondary 145th St 0/4 No Curb No highway=secondary
Washington Bridge highway=secondary 181st St 4/4 Median Barrier No highway=motorway
University Heights Bridge highway=primary Fordham Rd 0/4 No Barrier No highway=primary
Broadway Bridge highway=primary US 9 0/4 Median Curb No highway=primary

asked 26 Feb '21, 19:12

mdejean's gravatar image

mdejean
31225
accept rate: 0%

edited 27 Feb '21, 18:54

Just for info - you can link to how these objects have changed over time by linking to (for one lane of the Williamsburg Bridge for example) http://osm.mapki.com/history/way.php?id=40337615 .

(26 Feb '21, 19:48) SomeoneElse ♦

@SomeoneElse thanks, I've added those links to the last column of the table.

(26 Feb '21, 20:51) mdejean
1

It's troublesome because there are no legal designation, unlike the origin in UK Motorway. This is more suitable for discussion in forum and elsewhere, than an Q&A format.

You should mention the end connections as well. For example, the Triborough Bridge can be considered as a natural extension of I-278 connecting with FDR Drive, which would strongly be =motorway.

Personally, you should term the "limited-access" as restricted vehicle categories directly. Fundamentally, bridges usually have no driveways, making them "limited-access" already.

(27 Feb '21, 12:21) Kovoschiz

For many years, the vehicular ways of the Brooklyn Bridge were tagged as motorway, and those on the Manhattan Bridge as primary. In 2018 the Manhattan was upgraded to motorway to match the Brooklyn. This doesn't seem too offbase, since these two bridges are reasonably similar in nature.

Last year the infamous Fluffy89502 changed them both to primary as part of a large brutal re-classification campaign. That's certainly too minor a class, but I felt Fluffy did have a point that motorway was perhaps overselling them a bit. So I settled on trunk for both of them, based on the wiki's description of "limited access but not high speed."

I haven't given much attention to the other bridges or tunnels, but offhand I doubt that there is a single classification that would accurately describe all the bridges into Manhattan, since some of them directly connect to expressways and some connect surface streets.

(27 Feb '21, 14:31) jmapb

That really is quite a nice table.

After a bit of staring at the table, the map, and aerial imagery, I've begun to feel that perhaps the non-GWB Washington Bridge, the Williamsburg, and the Queensboro should be demoted to trunk. (Maybe even the Lincoln Tunnel and all of NJ-495, but I guess that's another topic.)

It would be working backwards of course, but I could invent a formula based on this table that would support that demotion. The simplest might to be to tally one point for every motorway link, plus one point for "vehicles only." A score < 5 means the bridge keeps the classification of the "carries" street, 5-8 merits trunk, and > 8 merits motorway. (Obviously this formula is almost completely arbitrary.)

I don't think any such formula should be binding, but it's interesting to take a look at the outliers.

(27 Feb '21, 22:08) jmapb

Thanks @Kovoschiz. I've changed that column name. I've also sent this to the tagging mailing list now, which is maybe a better place to discuss it.

(27 Feb '21, 23:05) mdejean
showing 5 of 6 show 1 more comments

In a conflict, particularly with primary, trunk and motorway tagging, I strongly recommend giving consideration to the lower value in the range that people are talking about. I don't believe every Interstate segment qualifies for motorway, though one-off and extremely extenuating circumstances can give an exception (like the traffic light for the Interstate Drawbridge on I 5). However, I don't think all of I 5 should be a motorway; north of Blaine City Center in Washington and south of I 8 in California is a pretty good case for a trunk since it's basically a freeway but there's pedestrians at both ends and on the Canadian end there's also a bicycle lane that moves from the right to the left side of the roadway, multiple traffic lights, at grade intersections and a big park with people often playing frisbee over the roadway.

I've got zero experience with the bridges in question, though. But there really should be a hesitancy to tag things as motorway when they don't operate like one. Often Trunk or Primary is a better value even if their network or official classification is higher.

permanent link

answered 28 Feb '21, 04:37

Baloo%20Uriza's gravatar image

Baloo Uriza
3.2k143061
accept rate: 9%

edited 28 Feb '21, 04:39

Follow this question

By Email:

Once you sign in you will be able to subscribe for any updates here

By RSS:

Answers

Answers and Comments

Markdown Basics

  • *italic* or _italic_
  • **bold** or __bold__
  • link:[text](http://url.com/ "title")
  • image?![alt text](/path/img.jpg "title")
  • numbered list: 1. Foo 2. Bar
  • to add a line break simply add two spaces to where you would like the new line to be.
  • basic HTML tags are also supported

Question tags:

×71
×23
×16
×10

question asked: 26 Feb '21, 19:12

question was seen: 1,135 times

last updated: 28 Feb '21, 04:39

NOTICE: help.openstreetmap.org is no longer in use from 1st March 2024. Please use the OpenStreetMap Community Forum